FR283

Initial Route Kp value is automatically filled in from the value stored on the selected Route entity

BG571

Create Profile doesn't draw the profile if there are no data points within the Profile panel

BG572

Profile Based Alignment Panel creation does not take Interpolated Kps into account

FR573

New command Create Coordinate Table - Chart Series

FR574

Fixed incorrect definition of Isis Track data format

FR575

New Command ACProfileInfo displays attached AutoChart Profile Information

FR576

Add Track Data to Profile changed to have Current Drawing and Chart Series options

FR577

Plan Report Updated to give option to include Point Kp values in output

FR578

Profile Report updated to include Maximum and Minimum Point Coordinates

FR579

New Command. Calculate E/N File from a Kp File and a Route Entity

FR580

New Command. Add Slope Block to Profile - Manual

FR194

GIS Block Query - add ability to export multiple blocks

BG396

Reverse Route Removes entity data from the selected polyline

BG494

First Profile Based Alignment Panel wrongly positioned with negative Panel Start and Initial Route KP

BG538

Cannot access Layer Manager from AutoChart Dialog in AutoCAD 2009

BG539

Bug when Selecting Chart Panel Origin/Extents in AutoCAD 2009

FR540

New Command - Add Objects to Plan

FR541

Improve Geodetic KP Calculation at Higher Latitudes

FR542

New Command - Export Chart KP Limits

FR543

New Commands - Plan Report and Profile Report

FR544

Add Slope Data to Profile changed to work on Block or Xref Profile Data

FR545

Add Slope Data to Profile changed to have 'Current Drawing' and 'Chart Series' options

FR546

Split "Normal" type profiles when Chart has multiple Plan Sub-Panels

BG548

Kp calculation error with points that fall very close to the Start of an arc on a route

BG549

Linear referencing of Eiva 5pt file not working in Import Route Command (GeoConsult only)

FR550

New Command - Import Profile Panels

FR551

Create Profile within Paper Space Charts

FR552

GIS Block Query to use a Route Drawing File rather than an existing polyline in the current drawing

FR553

Query Block Data includes angle of the Block in the Output

FR554

Add option to omit Axis End Label when it falls at Edge of Panel in Create Profile Dialog

BG555

Import Block Data fails when the data file only contains a single position

FR568

Ability to use First attribute as Block Name in Import Block Command

BG569

Import Block Data - Improve Block Angle Calculation at A/C Locations

FR124

Add Events to Plan - Use of Plan Event ini file to control Event Display

FR253

Ability to Import EIVA Rlx file format in Import Route

FR512

Ability to Import EIVA WP2 Waypoint File format in Import Block

FR533

Ability to Import EIVA Rln file format in Import Route

FR534

Ability to Import EIVA Cdf file format in Import Panels

FR535

Allow use of Next and Previous Chart Numbers with a Chart Lookup Table in Create Charts command

FR536

Ability to Import EIVA Lpa file format in Create Profile

FR528

Add Slope Block - Filter on Minimum Slope Value

FR530

More flexibility in reading data formats when Importing Latitude/Longitude based data

FR531

Compatibility with AutoCAD 2009

FR532

Add Danish Oil and Gas Event file format (Marin Mätteknik)

FR091

New Command. Create Matchlines

FR132

User Specified Location of Geographic/Grid  Labels in Create Grid Command

FR239

Add ability to Xref drawings into 'paper space'

FR240

New Command. Shade Key Plan

FR488

Enable Cut Data to trim Circles, Splines, etc.

FR489

New Command. Import Boundary

BG490

KP Axis Labels occasionally missing at Panel Extents

FR492

Option to add KP and IP Values to Create Coordinate Table and to create over a Chart Series

BG495

Add SBP Data not working with vertically split profile (Marin Mätteknik Cut Data Profile)

FR496

Add ability to plot fix numbers from Geoconsult Nav file format

FR499

Track Fix Annotation to use the closest value to the required Interval

FR500

New Command. Convert 2d poly to 3d poly

BG504

Incorrect KP Calculation at Acutely Angled AC Point

FR507

Point ID (Single) displays result on Command Line

FR508

KP ID (Single) displays result on Command Line

FR510

Change Import Route automatic Layer colours for Eiva 5pt Format (Geoconsult only)

FR511

Add Coda Format with Lat/Long positions to Import/Add SBP Command

FR513

New Command. Convert Text to Polylines

FR514

Improve Speed of Label Contours Command

FR515

Option to Label Contours with 'North-up' Label orientation

FR516

Cut Data Command to Cut and Rotate MTEXT entities

FR517

Filter Entities to be rotated in Cut Data Command

FR518

Output Profile Panel KP Limits to File during Create Profile Command

FR519

Enable True Scale and Scalebar to be added to alignment type Charts

FR520

Automatically apply XCLIP around Plan Frames during Insert/Xref Cut Data command

FR521

Allow Filtering of Events/Event Labels in Create Event Box ini based on User defined Criteria

FR522

Use Depth data in Import Block as the Block's Z insert point

FR523

Use String Codes in Template to Automatically fill in Previous and Next Chart Numbers

FR524

Use String Codes in Template to Automatically fill Client Reference Numbers from Lookup Table

FR389

Don't show pipe in cross profile when not detected (Eiva 5pt file format only)

BG471

Add Events to Plan crashes if created as an Xref with no events in Chart

FR473

Cross Profile Label Tic length can be defined in Create Cross Profiles command

FR475

Check for unreferenced block names when creating data xrefs and purge if found

BG476

Kp axis bug if tic length has no value assigned to it even if not using Kp major/minor tics

BG477

Admiralty Border not drawn correctly when CM is exactly through the centre of the rectangle

FR478

Added ability to hatch seabed area of cross profiles

FR479

Added ability to create embedment profile

FR480

Add Eiva 5pt file format to Import Route

FR481

New Command. Delete Polyline Vertices

FR482

Create Profile sub-divides hatch boundary based on 5000 point limit due to AutoCAD hatch problem

FR483

Add Surfer bln format to Create Cross Profiles

FR484

Show Cross Profile Markers for TPDS BP Format data in Create Cross Profiles

FR485

Create and add NVPTD Data symbols automatically during Create Profile Command (Geoconsult only)

BG486

Create Profile command bug causing crash if Colour was not set to ByLayer

BG487

Add Paired Events command not working with a vertically split profile panel

FR313

Ability to read an Xreffed profile in Add Events to Profile command

FR315

Add Event Data to Profile to be able to be saved as Block/Xref

FR375

Enable Layer Properties Dialog in Create KPs command

FR388

New Command - Add Paired Events to Profile

BG390

Create Profile Based alignment Panels ignores initial Route Kp

FR457

KP Axis can be drawn at the Top or the Bottom of the relevant Panel

FR458

Current Drawing/Chart Series Options for Add Events to Plan command

FR459

File/Directory Import options in Add Events to Plan command

FR460

Lookup functionality in Add Events to Plan command

FR461

Numerical formatting of Event Text in Add Events to Plan command

FR462

Current Drawing/Chart Series Options for Add Events to Profile command

FR463

File/Directory Import options in Add Events to Profile command

FR464

Lookup functionality in Add Events to Profile command

FR465

Numerical formatting of Event Text in Add Events to Profile command

FR466

Vertical Event Text orientation in Add Events to Profile command

FR467

Remove requirement for attributed block in Add Events to Profile command

FR468

Enable Layer Properties Dialog in Add Events to Profile command

BG469

No Valid PipeTracker Data events incorrect when a single Flag is used (Geoconsult only)

FR470

AutoChart Menus re-ordered to more logical/consistent locations

BG471

Add Events to Plan crashes if created as an Xref with no events in a Chart

FR116

Chart Series Commands allow selection of a subset of Charts from the Chart Directory

FR134

New Command - Xref/Block Remove

FR151

Add Suffix to Chart file names during Bind Process

FR236

Ability to Group X-Profile Entities in Xref

FR245

Ability to Create Long Profile from extents of Data

FR295

North Sign now drawn on Grid Layer rather than Geographical Layer

FR313

Add Event Data to Profile to be able to read XReffed Profile

FR349

Enable Event Text 2 for Line Events in Event Box ini file

FR363

Create Event Box ini command now asks whether to Load an existing ini file or create a new empty file

FR368

Mean Adjacent Profile Enabled for VisualWorks format (GeoCentury UK only)

FR369

Hatch Pipe option enabled for Custom Longitudinal Profile Formats

FR370

Add "Profile - " prefix to Profile Layer names when using custom format

FR372

Ability to Hatch Pipe in Cross Profiles

BG374

Error when creating X-Profiles as Xrefs in descending Kp charts

BG381

KeyPlan panels not shaded correctly due to non-zero INSBASE Setting

FR382

Event File Format added to Create Event Box ini Dialog

FR383

Total Strip Count added to Create Event Box ini Dialog

FR385

Ability to Control number of digits and decimal places in Event Text

FR386

Hard code Profile Hatching, types, colours layers etc (Geoconsult only)

FR397

Export Polyline to VisualWorks Sailline format

FR398

Ability to Specify Pipe Diameter for Pisys SQL Database Data in Create Profile Command

BG399

Corruption of Event Ini File when re-saving

BG400

Create Events command occasionally displays custom format error when no error present

FR402

Create Charts - Auto fill codes for Chart Centre and Chart Rotation

BG403

Create X-Profile Dialog too large for 1024x768 screen

FR404

Create Coordinate Table updated to provide Easting, Northing, Depth from a 3D polyline

FR443

Ignore Seconds for Time Based Interval Filters in Import Track Command

BG444

Export Panels from Chart Series Error

BG445

Adding Sub-Bottom Data Fails with a vertically split profile

FR446

Ability to use up to 5 panels areas in Enable Charts

FR447

Ability to create Event file from Eiva 5pt detailing No Valid Pipetracker Limits

FR448

Update Eiva 5pt format import in Create Profile to accommodate new status codes

FR449

AddSpans command updated for new event codes (Geoconsult only)

FR450

Ability to Create X-Profile Blocks/Xrefs in Real-World Coordinates

BG451

Add Sub-Bottom fails when profile point count is a multiple of 50

FR452

Marin Mätteknik Block Data Format added to Import Block Command (Marin Mätteknik only)

FR453

Marin Mätteknik Route Data Format added to Import Route Command (Marin Mätteknik only)

FR454

Marin Mätteknik Profile Data Format added to Create Profile Command (Marin Mätteknik only)

FR455

Marin Mätteknik Slope Data Format added to Create Profile Command (Marin Mätteknik only)

FR456

ISIS Track Data Format added to Import Track Command

FR131

Add Lookup Functionality to Events Dialog

FR367

Ability to run Lisp file across Chart Directory. New command ACBatchLisp.

FR366

Hard code Top of Pipe colour to 10 in Create Profile (Geoconsult Only)

FR348

Ability to import directory of files in Create Events.

FR347

Ability to import directory of files in Create Cross Profiles.

FR346

Add Event Data to Plan to be able to saved as Block/Xref.

FR345

Add Events to Plan -  Filter File format is now comma delimited.

FR343

Change Single/Multiple commands name to be more intuitive -  Current Drawing/Chart Series.

BG342

Relative Pathing fails when creating charts with different Geographic Location.

FR341

Ability to Add SBP Data to Profile in Current Drawing.

BG340

Create Charts Multiple Geographic Location Panel Order Incorrect.

BG339

Import Route POI file incorrect Initial Kp.

BG337

Invalid ACUtil2K7 error. Only affects AutoCAD 2007/2008 and with Windows XP SP2 preinstalled.

FR336

Improve Import Sounding overwrite removal speed.

BG335

Sub-bottom Profile not drawn when SBP data starts before Profile data.

FR334

Ability to place Soundings on Layers corresponding to Colour Banding.

FR333

Ability to specify boundary when Importing Soundings.

BG331

Error when attempting to add Sub-Bottom to second profile in drawing.

BG271

Keymap not filled with panel solid when Panel Set ID contains "-".